Have you ever experienced a tire burst ? or your car tire leak and you ‘re alone no one else who can turn to for help , at times like these very skills needed to change a tire yourself , here are some ways to replace your car tires ruptured or leaking :
1 . Pull over and park the car in a safe place and flat .
2 . Secure car by pulling on the hand brake . If you are on the ramp wheel chock with a hard object ( such as wood or stone ) so that the car does not move backwards . If possible you can park diagonally when on steep inclines .
3 . Then turn on the hazard warning triangle lamp and plug a few meters behind the car to maintain a safe distance and notify other riders who crossed that your car is in trouble .
4 . Suggest that you read the manual first to find out what kind of equipment is needed and the place where the equipment is available in your car . Commonly available equipment in the car , among other spare tire , jack , and wheel locks . Prepare all equipment and the spare tire in place of your average easy reach.
5 . Open wheel cover if any . then loosen the wheel bolts . Turn the wheel bolts using the key counter -clockwise . If necessary use a foot to loosen the bolt . Loosen the bolt partially but not to loose .
6 . Having the bolts loose , car jack plug . Position the jack at a designated place in the manual in order not to damage the car . Jack the car so that the wheel was lifted to a height that allows you to remove and install tires .
7 . Having lifted the wheel , release all wheel bolts before and put bolts in a safe place that is easy to reach. Be careful when you put the bolts that bolt the wheel does not roll off and disappear .
8 . If all the bolts are already separated then you can release the tire you want to replace . Car tires may be quite severe for some people , if you have trouble removing seek help from others . Put the tires that have been removed earlier in a flat and safe .
9 . Attach the spare tire in the right position . Then replace the screw – bolt wheels follow the pattern of star / cross . You do not have to worry if the bolt is not firmly attached , you can tighten it after the jack lowered .
10 . Lower the jack slowly until the wheels touch the ground .
11 . Tighten the screw – bolt wheel by turning it clockwise using a cross pattern . Make sure the tires are mounted firmly .
12 . Granted tires that have been released into place . Check the back of your equipment before putting it back in the car .
If you are in a quiet place you should keep your car drove up to a crowded place to avoid the greater risk is robbery . Indeed, your tires will likely be broken , but your safety is more important is not it?