In general, motor vehicle engines can be divided into two 4-stroke engine and the 2-stroke engine. Both have a fundamental difference to the motor with a 4 stroke engine does not generate too much smoke through the exhaust. Motorcycles with 4-stroke technology has many advantages one of which is more efficient than 2-stroke engine. Besides the motor 4 stroke also has other advantages such as treatments that are cheaper and more simple. To find out more about the workings of the 4 stroke engine, see review below!
NEXT TO WORK MACHINE 4 TAK
- Step Suction
On a motorized machine contained a piston that moves from the dead point to the top (TDC) to bottom dead center (BDC). In this step the fuel and air mixture to be sucked into the cylinder. After the suction valve opens while the exhaust valve to be closed. When the piston moves down will cause the cylinder into a vacuum chamber. The entry of a mixture of air with the fuel into the piston due to the air pressure from the outside (atmospheric pressure).
- Step Compression
When the piston moves to the bottom dead center (BDC) to top dead center (TDC). In this step with the fuel-air mixture to be compressed. Then the suction valve and exhaust valve will be closed. When the piston rises from the bottom dead point to the top dead point a mixture of fuel and air is sucked to be compressed. The result is the pressure and the temperature will be rising, so it will be flammable.
- Step Enterprises
In step these efforts will generate useful power to drive the vehicle. The piston will move from the dead point to a bottom dead point during the motor running. Shortly before the piston reaches top dead point in the compression stroke, spark plugs will provide the spark jumps the fuel mixture and the air is already compressed. With the combustion process, the strength of the high pressure combustion gases that will push the piston down. At this business step into the engine power (engine power).
- Step Discard
In this step the piston is still moving from the bottom to the top point point. Burning gas will be discharged from the cylinder. Valve opens, the piston moves from the bottom point to point up that will encourage gas from the burning out of slinder. When the piston reaches the top point, will begin moving again for the next preparation step is a step suction.
For treatment step motor 4 is not it better as well as fuel efficient. Besides servicing process should be done regularly in order to keep the vehicle engine to work optimally and comfortable when driving. For replacement of spark plugs should be done after reaching a distance of approximately 12,000 km. Thus was the discussion of the working 4 stroke engine in the vehicle.